ION Audio Select LP - Manual (Page 4)

4
Recording
To record music to your computer, you can use ION EZ Vinyl/Tape
Converter. EZ Vinyl/Tape Converter makes it easy to turn your music
into digital files. After you finish converting your vinyl, you can then burn
to CD or load onto portable media devices.
To install the software, insert the included CD into your computer, and
follow the on-screen instructions.
1. With EZ Vinyl/Tape Converter installed on your computer, use the included USB cable to connect Select LP's
USB port to an available USB port on your computer.
2. On your computer, you can open EZ Vinyl/Tape Converter by going to Start Menu  All Programs (Windows)
or the Applications menu (Mac).
3. Follow the on-screen instructions to set up your recording. When prompted to play your music, move Select
LP's tonearm over the record to start playback.
Note: To listen to a record while it's playing, listen through your computer's speakers, or connect Select LP's
RCA outputs to a stereo system or powered speakers. Select LP must be connected to the computer in order
for EZ Vinyl/Tape Converter to advance to the next step.
4. When you have finished recording, raise Select LP's tonearm from the record and return it to its arm clip.
Features
1. Platter – Place your record here.
2. Tonearm* – The tonearm can be
raised and lowered by hand, or by
pressing the raise / lower lever.
Please note that the tonearm needs
to be moved away from resting
position (on the arm clip) for the
turntable motor to activate. When
the tonearm is placed back in its
resting position, the turntable motor
will deactivate if Autostop has been
turned on.
3. Arm Clip – This specially designed
arm clip secures the tonearm while
at rest or when not in use. The arm
clip has been designed to remain in
the up position while unlocked.
4. Raise / Lower Lever – Raises and
lowers the tonearm.
5. 33 / 45 / 78 Switch – This switch
controls the RPM of the turntable
platter. If the record is not playing at
the correct speed, see the
Troubleshooting section for details
on how to resolve this.
6. 45 RPM Adapter Holder – Holds
the included 45 RPM adapter. When
not using the adapter, please place it
in this holder.
7. Autostop Switch – This switch turns
autostop on or off. When autostop is on,
the platter will start spinning when the
tonearm is placed over the record and
stop spinning when the record has
reached the end. (When autostop is off,
the platter will always spin regardless of
the position of the tonearm.)
Note: If your vinyl record stops before it
reaches the end of the music, turn Autostop
to the off position for this particular record.
This is generally recommended for 45 RPM records.
IMPORTANT: Remove the plastic
cartridge cover (needle cover) before
operating the turntable.
Visit ionaudio.com/ezvc to download
the latest version of EZ Vinyl/Tape
Converter software or for helpful
troubleshooting guide and additional
support.
* IMPORTANT: If the turntable's stylus becomes
worn, purchase a replacement cartridge/stylus at
ionaudio.com/products/accessories or by
contacting the ION Parts Dept. at 401-658-3743
(U.S.) or [email protected].
1
2
3
4
5
7
6
8
Aux Input
11
12
13
10
9