Frequently asked questions – Acura 2009 TSX 00X31-TL1-8001 User Manual
Page 143
142
Navigation System
Frequently Asked Questions
When I drive at night, the screen is bright and will not switch
to the night display mode. Why?
Verify the following: The nighttime dash brightness control is not set to
maximum, and
Map Color
in SETUP is set to
Black
for Night. See
Switching Display Mode Manually on page 113.
The daytime
map
screen is dark like the night display mode,
and it is hard to see. Why?
Verify the following: The
Map Color
in SETUP is set to
White
for Day.
See Switching Display Mode Manually on page 113.
Once I press the
Display Mode
button
, the screen no
longer automatically switches between day and night display
modes. Why is this?
This is normal. Once you press the
Display Mode
button
, you are
manually controlling the display mode. Your manual display mode setting is
canceled the next time the vehicle is started.
How can I input my destination using map coordinates?
The navigation system was not designed for this. However, you can view
the coordinates of an address by pushing in on the
Interface Dial
, selecting
Show Icon on Map
, and moving the
Interface Dial
left to select
Current Location
. See Map Screen Legend on page 55.
How do I change or remove my PIN?
Go to “Personal Information” in the
SETUP
screen (
Other
), and select
PIN
Number
. Select
User 1
or
User 2
and enter your existing PIN, and then
you have the choice to change or remove the PIN. See page 97.
I forgot the PIN for Home, or the PIN for personal addresses
(User 1 or User 2). How do I reset it?
PINs are optional. See information regarding PINs on page 97. Your dealer
can reset the PIN for you.
CALL
is not available on the
Calculate route to
screen.
Why?
Your phone is not paired to the HFL, or if your phone is paired, it is in use
or does not have good coverage; press the
HFL BACK
button.
Problem
Solution