Acura 2009 TSX 00X31-TL1-8001 - Manual (Page 115)

114 Navigation System
System Setup
Switching Display Mode Automatically
I
Recommended Display Mode Day/Night Settings:
• With the headlights on, select mid-range for the dash illumination (see the vehicle Owner’s manual for location of knob).
• With the headlights off, select mid-range for the dash illumination (see the vehicle Owner’s manual for location of knob).
• On the SETUP Color adjustment screen, choose white for the map Day display and black for the map Night display (see
page 113). Inappropriate adjustment of these colors can cause the Day / Night modes to appear inoperative.
• Remember that once the Display mode button is selected, the other display mode controls are overridden until the
vehicle is restarted.
NOTE:
See the vehicle Owner’s manual for additional information regarding the dash brightness adjustment.
llumination control Priority Operation But remember
Display Mode button
(see page 11)
1 Allows selection of Day , Night , or Off display
mode. This button has the highest priority and
overrides all other display control adjustments
listed below.
Once you press this button, you assume full
manual control of the display mode until the
ignition key is cycled again.
Dash illumination adjustment
knob (see the vehicle Owner’s
manual for location) 2 When headlights are turned on, and you wish to
have the
Day display mode, then adjust the
illumination to the full bright setting (beeps).
Adjust the dash brightness back to mid-range
to allow auto switching by sensing the
headlights are on or off.
Headlights (Auto/On/Off) 3 When turned on, the display changes to Night
display mode. The previous two controls listed
above can “cancel” this function.
Use the Display Mode button , or
adjust the dash illumination to full bright to set
the display to your desired choice.
Map Day / Night screen color
choice (see page 113 for the
Day and Night color choices)
N/A The user can select the color of the screen that
will be displayed for the
Day and Night
display modes described above.
For best contrast, ensure that the map color is
white for
Day and black for Night .