Sonnet Technologies G5 Jive - Manual (Page 13)

13
Figure 46
Figure 45
Figure 44
Figure 43
Installation Steps for Power Mac G5 with PCI-X Slots
6. Connect the optical drive’s power cable connector to the G5
Jive’s power adapter cable’s 4-pin female connector; verify the
connectors are plugged in securely (Figure 43).
7. Connect the power adapter cable’s male connector to the optical
drive; verify the connector is plugged in securely (Figure 44).
8. Reconnect the ribbon cable to the optical drive; verify the con-
nector is plugged in securely (Figure 44).
9. Aligning its guide pins so they will engage the four slots inside
the computer, slide the optical drive back all the way into the
drive bay, making sure no cables or wires get pinched
(Figure 45).
10. Push the levers closed to lock the drive in place (Figure 45).
11. Take up any slack in the power adapter cable by pulling it down
toward the attached drives (Figure 46).
12. Push the fan/speaker assembly back into place (Figure 46).
optical drive
power connector
4-pin female power
adapter cable connector
ribbon cable
optical drive
release lever
fan/speaker assembly
power adapter cable
4-pin male power adapter
cable connector
release lever
PC
I-
X
Po
w
er
M
ac
G
5
In
st
al
l