Sonnet Technologies Fusion F2QR - Manual (Page 4)

Fusion F2QR Features, Safety Precautions
2
1 – Drive Power and Activity LED Indicator, Drive 2
This LED indicates the drive’s ready state (blue LED on), read
and write activity (blue LED flashing), drive error and RAID
1 rebuild operation (red LED flashing).
3 – Power Cable Socket
When you connect the Fusion F2QR to your computer using
an eSATA or USB cable, you must also provide power to the
drives using the included power cable or the optional Fusion
World Travel Power Adapter (part # PWR-UAC-12V).
4 – FireWire 800 Interface Ports
In addition to FireWire 800, these ports support FireWire
400 connections on computers and adapter cards when
used with the included FireWire 400 to FireWire 800 cable.
Fusion F2QR may be bus powered (no other power source
required) when connected to a powered FireWire port on a
computer or hub.
SAFETY PRECAUTIONS
Please read this section carefully before proceeding. These
precautions explain the correct and safe use of this device,
thereby helping to prevent injury to you or others, and also help
you to minimize the risk of damaging the device.
Warnings
Always follow the basic warnings listed here to avoid the risk of
serious injury or death from electrical shock, short-circuiting, fire,
and other hazards. These warnings include, but are not limited to:
• Do not attempt to disassemble or modify the enclosure. If this
device appears to be malfunctioning, contact Sonnet Customer
Service.
5 – eSATA Interface Port
This port is compatible with standard eSATA data cables.
When connected to your computer using the eSATA cable,
Fusion F2QR requires a power source.
6 – Mini USB 2.0 Interface Port
When connected to your computer using the USB cable,
Fusion F2QR requires a power source.
7 – Security Slot
This slot works with Kensington
® brand and similar security
locks to secure the Fusion F2QR enclosure and deter theft.
• Do not drop the enclosure. Dropping or mishandling the
enclosure may void the warranty.
• Do not expose the device to rain, use it near water or containers
that contain liquids which might spill into any openings, or use
it in damp or wet conditions.
• If unusual smells, sounds, or smoke come from the device, or if
liquids enter it, disconnect the power cable immediately.
• Follow the instructions in this manual carefully; contact Sonnet
Customer Service for additional advice not covered in this
manual.
2 – Drive Power and Activity LED Indicator, Drive 1
This LED indicates the drive’s ready state (blue LED on), read
and write activity (blue LED flashing), drive error and RAID 1
rebuild operation (red LED flashing).