Sonnet Technologies Fusion F2QR - Manual (Page 3)

Introduction
1
1 – Fusion F2QR 2-Drive RAID SATA Storage System
2 – Carrying Case
Store the Fusion F2QR, interface and power cables for on-the-
go use.
3 – Power Cable
Power the F2QR using a spare FireWire 400 port on your
computer or powered FireWire hub.
4 – eSATA Cable
1-meter eSATA data cable
Thank you for purchasing the Sonnet Fusion ™ F2QR portable
2-drive hardware RAID storage system with quad interface.
With its small footprint, low power requirements, and great
performance, this rugged device is ideally suited for use in the
field or office.
The F2QR’s quad interface offers extensive connectivity. Choose
eSATA or FireWire 800 for maximum speed or medium speed,
respectively. Or, use FireWire 400 or USB 2.0 for flexibility.
The F2QR’s built-in hardware RAID controller supports RAID 0
(striped), RAID 1 (mirrored), JBOD (just a bunch of disks) and
SPAN configurations without relying on a separate adapter card.
Out of the box, the drives inside Fusion F2QR are unconfigured
and unformatted. Continue reading to learn how to set the
drive configuration to meet your needs.
5 – FireWire 800 Cable
1-meter 9-pin male to 9-pin male cable
6 – FireWire 400 Cable
1-meter 9-pin male (FireWire 800) to 6-pin male (FireWire
400) cable
7 – USB 2.0 Cable
2-meter A male to mini B male cable
Fusion F2QR Package Contents