Features, A. range switch, B. analog output – SKC Limited Haz-Dust I User Manual
Page 5
FEATURES
A. RANGE SWITCH
Hi range - This range provides the most sensitivity. The range span is from 0-20
mg/m³.
Lo range - This range setting is recommended for monitoring in areas that generate
more than 10mg/m³ of dust. The range span is from 0-200 mg/m³.
B. ANALOG OUTPUT
Although the DL-103 Data Logger is recommended, the 0-2v output can transfer
its linear analog voltage to any data logging device that can accept an analog
signal. This output should be utilized if hard copy documentation is needed. 0-1v
corresponds to 0-100mg/m³. The HD-1100 will over range to 2volts or 200mg/m³.
4