Psu-manual-05, Psu product manual – SilverStone ST75F-G Evolution installation User Manual
Page 5

Power supply installation (For new system assembly)
Power supply installation (For replacement)
Turn on the power supply by switching to "I" (I/O) mode.
Caution: The power supply is on standby now. System
on and off is controlled by the motherboard.
(Please refer to the motherboard manual)
After turning off the system, switch the
power supply to "O" position to disable
system standby and make sure the system
is no longer drawing any power.
Remove all power supply cables
connected to the motherboard, video
card, hard drive and other device.
PSU product manual
ENGLISH
13
1
2
Remove AC power cable from the
power supply.
Remove power supply from the chassis.
(Please refer to your chassis's installation manual.)
5. Please refer now to Step 1 of "Power supply
installation (for new system assembly)"
3
4
3
- ST85F-G Evolution installation ST1000-G Evolution installation ST1200-G Evolution installation ST35F-P installation ST40F-P installation ST50F-P installation ST60F-P installation ST75F-P installation ST85F-P installation ST1000-P installation ST1500 installation ST40F-ES installation ST50F-ES installation ST60F-ES installation ST70F-ES installation ST40NF installation ST50NF installation ST30GF installation ST42GF installation ST46GF installation ST50GF installation ST55GF installation ST45SF installation