SilverStone ST75F-G Evolution installation - Manual (Page 3)

Power supply installation (For new system assembly)
Please ensure power supply is not
connected to AC power cable.
Please switch to the correct voltage
for your location. ( For non-PFC power
supplies only)Note: Power supplies
with PFC function can adjust input
power voltage automatically without
user intervention.
Place the power supply in the chassis location
designated for power supply and secure it.
( Please refer to your chassis manual)
Connect ATX 20-pin/EPS 24-pin power
cable to the motherboard's
corresponding connector.
Connect ATX +12V 4-pin / EPS +12V
8-pin power cable to the motherboard's
corresponding connector.
Connect PCI-E 6-pin/8-pin power cable to
PCI-Express video card's corresponding
connector. (If necessary)
PSU product manual
ENGLISH
1
2
3
4
5
6
1