SilverStone ZM1350 - Manual (Page 2)

ZEUS SERIES
SPECIFICATION
SilverStone ZEUS
ZM1350
ATX12VSwitching Power Supply
With Active PFC
01
1.1 Input Voltage
The power supply shall be operated at universal input voltage defined in the following
table.
1.2 Frequency
The input frequency range is from 50Hz to 60Hz.
1-3. Inrush Current
The max inrush current is 160A for 230VAC 90A for 115VAC.
Table 1 AC Input Line Requirements
Power factor correction (PF)>0.90 at full load.
lnput Voltage
Voltage
Min
90
Max
264
Nom.
100 - 240
1. Input Requirements
02
1-3-1. Cold Start
Conditions Limits
No component over
stress or damage
should occur to the
power supply.
Input fuse shall
not blow.
115/230VAC, full load.
25℃ ambient.
1-3-2. Warm Start
Conditions Limits
No component over
stress or damage
should occur to the
power supply.
Input fuse shall
not blow.
Turn off at 132/264VAC
full load for 1 sec then
turn on at the peak
of the input voltage
cycle at 25℃ ambient.
1-4. AC Input Current
AC Input MAX
18-9
Units
AMPS 100-240V
1-5. Efficiency
The power supply efficiency shall not be less than85% at the maximum
load of sec. 2.2 and 115Vac input voltage.