Lincoln Electric AIR VANTAGE IM10065 - Manual (Page 11)

AIR VANTAGE® 500 CUMMINS
A-1 INSTALLATION A-1
TECHNICAL SPECIFICATIONS - AIR VANTAGE® 500 CUMMINS (K2325-3)
Make/Model Description Speed (RPM) Displacement Starting Capacities
cu. in. (ltrs.) System
4 cylinder High Idle 1900 199(3.3) 12VDC Battery & Fuel: 25 gal.
Cummins 56 HP (42kw) starter (94.6 L)
B3.3 1800 RPM Full Load 1800 Bore x Stroke inch (mm) Oil: 2 gal. (7.5L)
Diesel Engine
Low Idle 1425 3.74 X 4.53 Radiator Coolant:
(95 x 115mm) 2.6gal. (9.8L)
INPUT - DIESEL ENGINE
RATED OUTPUT @ 104°F(40°C) - WELDER
Duty Cycle Welding Output Volts at Rated Amps
100% 500 Amps (DC multi-purpose) 40 Volts
60% 550 Amps (DC multi-purpose) 36 volts
50% 575 Amps (DC multi-purpose) 35 volts
PHYSICAL DIMENSIONS
Height (2) Width Depth Weight
42.0 in 32.7 in. 63.1 in. 1690 lbs.
(1066.8 mm) (830.1mm) (1603mm) (766kg)
(Approx)
1. Output rating in watts is equivalent to volt-amperes at unity power factor.
Output voltage is within +/- 10% at all loads up to rated capacity. When welding, available auxiliary power will be reduced.
2. Top of Enclosure, add 7.0” (177.8mm) for exhaust pipe.
OUTPUT @ 104°F(40°C) - WELDER AND GENERATOR
Welding Range
30 - 575 Amps CC/CV
20 - 250 Amps TIG
Open Circuit Voltage
60 Max OCV @ 1900 RPM
Auxiliary Power (1)
120/240 VAC
12,000 WATTS, 60 Hz., Single Phase
20,000 WATTS, 60 Hz., Three Phase
Compressor Model Description Delivary Maximum System Compressor Capacities
Pressure Profection
VMAC™ Belt-Drive Rotary High Idle Mode: 150 PSI Safety Relief Valve 1.3 gal.(5.0 ltrs)
S700157 Screw Air Compressor 60 CFM @ 100PSI (10.5 kg/cm 2 ) 200 PSI
(28.3 Ltr/sec. @ (10.5 kg/cm 2 )
7.0 kg/cm)
Low Idle Mode: High Temperature
40 CFM @ 100PSI Automatic Shutdown
(18.9 Ltr/sec. @ 290° F (143°C)
7.0 kg/cm)
COMPRESSOR SPECIFICATIONS