SecurityMan NiteCam2 User Manual
Page 13
Camera Installation
1. Locate where you would like to install the camera
13
Please follow the steps below to install the camera to a wall or ceiling.
1.1 Secure the three screw anchors into wall (or ceiling)
to match the hole pattern in the camera bracket
1.2 Align holes in the camera bracket and the anchors, and
secure the camera on the wall with three screws
2. Adjust the angle
2.1 Unscrew Fastener 1, adjust the camera to an appropriate
angle, and then fasten it.
2.2 Unscrew Fastener 2 to adjust the camera to an appropriate
angle, and then fasten it.