Audiovox afx-35 - Manual (Page 24)

Controlling Transmission Quality
Preparing a Good Original
To prevent jamming and ensure good results on
receiving fax machine:
Remove all staples, clips and tape from
original documents.
the
the
If you must re-fax a document that was faxed to
you, we recommend that you make a copy of it
on a regular office copier, and fax the copy for
better transmission quality.
To create good quality original documents, do the
following:
l
Type them instead of writing.
l
When writing, use a felt-tip pen and black ink.
l
Use white paper.
Do not try to send documents that are:
l
Wet or damp
l
Covered with wet ink or paste
l
Too thin (such as onionskin, airmail paper or
pages from a magazine)
l
Chemically processed (such as pressure-sensitive
paper or carboncoated paper)
l
Coated (such as glossy paper)
l
Too small or short (such as a label or card)
l
Made of cloth or metal
Use an office copier to piece together several small
originals or make a standard size copy of an
original which is too small to load in your unit.
Page & Document Size
Limitations
Your unit accepts original documents no smaller
than 6 inches wide by 8.5 inches long, and no
larger than 8.5 inches wide by 59 inches long.
Do not attempt to load 2 or more documents into
the unit when the documents are too thin or too
thick. These documents might fail in automatic
feeding. Feed one sheet at a time. Refer to the
following chart for acceptable thickness.
2 or more
sheets
Single sheet
Thickness of
Document
Make a standard copy by using an office
to send the document of unacceptable
Setting the Resolution
unit allows to send a fax at a higher resolution.
J s e F I N E r e s o l u t i o n t o s e n d v e r y d e t a i l e d
documents with intricate drawings or small type.
Transmission time will be increased if FINE, mode is
set but the results will look better at the receiving
end
Vote: A document must be loaded into the unit for
function to be operated.
To send a fax in FINE resulution, press [FINE]
dialing, the FINE indicator lights to confirm
the FINE mode is activated.
To see how your document will look at the receiving
end, use your unit to make a copy with whatever
settings you like (NORMAL or FINE mode).
Making Copies
Your fax unit doubles as a handy copy machine.
1. Load the document face down into the unit.
2. Adjust the resolution of document by using
[FINE], if necessary.
3. Press [START/COPY].
Note: If you copy 2 or more pages, be sure the
bottom sheet enters first.
23