Audiovox afx-35 - Manual (Page 23)

Important Sendina Facts
continued
Voice Request
If you are sending a document and want to
speak to the remote party;
1. Press [V.REQUEST] while sending. The V.
REQUEST indicator lights to confirm your
request. But your request will not go through until
the unit finishes sending the last document.
2. When sending is finished, the call signal is sent
to the remote party’ unit. The remote party may
pick up the handset within 15 seconds if they
wish to speak.
3.
If
If no one answers the request within 15 seconds,
the signal ends. Your unit returns to the standby
mode.
When the remote party responds, you hear a
warbling tone, and the V.REQUEST indicator
goes off. Pick up the handset and begin your
conversation.
you hear a warbling tone and the window
displays ‘VOICE REQUEST’ when sending is
finished;
The remote party wants to talk to you. Simply pick
up the handset and say “Hello”.
If you do not respond to the voice request, your unit
will print out a call back message, which shows the
telephone number of the remote unit.
SEP-m-92 14:a
PLEASE CALL BACK.....
PHONE NUMBER : 281 3950
22
Confirmation Report
A confirmation report will be printed out after every
send operation if you have selected this feature to
be activated by answering [YES] to the prompt
‘CONF. REPORT while setting “User Options”
(see page 25). Example is provided on page 26.