Audiovox afx-35 - Manual (Page 20)

Sendina
Q This section shows how to prepare a document
and send it. it also shows how to take
advantage of features that save time or improve
the quality of your transmission, such as one-
touch or speed dialing, changing resolution and
contrast, and using your fax machine to make
copies.
Sending a Document
1. Place the document face down and adjust the
document guide to match the width of the
document.
Note:, Slide the guide smoothly to the left or right. If
you move it with great force, it might be
broken.
2. Gently insert the leading edge of the document
into the loading slot until you hear a beep tone
and the machine has begun to grab the
document(s). After the document is secured, the
unit displays the standby mode. The document is
now loaded and ready to send.
Bee
Notes:
l
You can stack up to five sheets of paper at one
time. Stagger the leading edge of the sheet
slightly and insert the sheets with a slight push to
assure smooth feeding.
Be sure the bottom sheet enters first as shown
below.
If you want to add documents while sending,
insert it into the loading slot so it is placed on the
top of the preceding one as shown below
3.
4.
Pick up the handset and dial the number of the
remote fax machine you want to send to. You
can also use one-touch dialing or 2digit speed
dialing for this Step. See “Memory Dialing” on
page 20.
When the line is answered:
If you hear a fax tone, press [START/COPY]
and hang up. Your unit starts sending.
If you hear a voice, instruct the answerer to
press the [START] on their unit. When you
hear a tone, press [START/COPY] and hang
up.
If you hear a busy signal. press
[START/COPY] and hang up the handset.
Your unit automatically redial the number and
send the document (see “Automatic Redialing"
on page 20).
5. When the last page has been sent, long beep
sounds, and your unit hangs up.
Hint: To cancel sending at any time, press [STOP]
twice.
19