Securitron AQU243-8C - Manual

Installation Instructions AQU126, AQU126-8C, AQU243 and AQU243-8C
Securitron Magnalock Corporation
10027 S. 51
st
St., Ste 102
Phoenix, AZ 85044
Doc.# 500-33025 Rev. B Installation specifications subject to change without notice
ASSA ABLOY, the global leader
in door opening solutions.
Phone: (800) MAGLOCK
[email protected]
www.Securitron.com
Page 1 of 6
Installation Instructions
AQU243 24vdc 3.3A Supervised Power Supply/Charger module
AQU126 12vdc 6.5A Supervised Power Supply/Charger module
Both mounted in an enclosure 14” x 9” x 3.5”
PDB-8C Power Distribution Module with 8 power-limited output circuits
AQU243-8C – AQU243 with 1 PDB-8C-.72A providing 8 power limited outputs mounted in enclosure
AQU126-8C – AQU126 with 1 PDB-8C-1.5A providing 8 power limited outputs mounted in enclosure
Features:
 Super Clean DC Outputs
 Tolerates
Brownouts
 Universal Input: 85vac – 260vac
 Self contained No External Transformer Required
 Precision Battery Charging and Output Regulation.
 Outputs are class II Power Limited with PTC Circuit Breakers
 Indicating LEDs:
AC Input, Green
DC Main Power, Red AQU126-8C
Each Output Green (multi-output models)
 AC Fail Alarm Form C Contacts
 Low Battery Alarm Form C Contacts
 Battery Cut-off Relay Prevents Deep Discharge
 Battery is Float Charged for Faster Charging
with No Switch Over when AC fails.
 Thermal Protection
 Short Circuit Protection
 Plug-in Battery cable assembly is provided
 36” Plug-in Battery cable assembly is available
(WA-36IBAT) for remote battery mounting.
 Quality Manufactured in the USA
 UL and CUL
Listed Modules are
UL and ULC 603 Burglar Alarm System Power Supply
UL and ULC 294 Access Control Accessory
UL and ULC 1481 & NFPA72 Power Supplies for Fire-Protective Signaling Systems
 Certified Compliance with EN 55022 & FCC