Schlage BE365 User Guide - Manual (Page 2)

2
Keypad Deadbolt (BE365)
Lock Parts
Keypad
• Used to enter codes for programming and unlocking.
See the Keypad Locks Programming Guide for more
information.
Outside Thumbturn
• Used to unlock the lock after a valid User Code has been
entered, or to lock the lock after the Schlage button has
been pressed.
Cylinder
• Used only in emergency situations to unlock the lock. See
Emergency Key Override on page 3.
Inside Thumbturn
• Used to lock or unlock the lock.
Inside
Thumbturn
Outside
Thumbturn
Keypad
Cylinder
Standard Operation
If lighting is low, press the Schlage button to illuminate the keypad before beginning.
Locking Unlocking
1. Press the Schlage
button.*
2. Rotate the thumbturn
away from the hinges.
1. Enter a User Code
into the keypad.
2. Rotate the
thumbturn toward
the hinges.
* If the Turn Lock feature is disabled, a valid User Code must be
entered to lock the door. See Turn Lock Feature on page 7.