AT&T 1760 - Manual (Page 22)

19
Delete Messages
Delete All Messages
1 Connect with the answering system
2 After you have listened to all messages and heard the two beeps, press
3 3. All
messages are deleted. (If you haven’t listened to messages, you will hear an error
tone, and the messages will not be deleted.)
Delete Selected Message
Press 3 while the message is playing.
Record Announcement
1 Connect with the answering system.
2 Press
7 *.
3 Speak after the beep, then press 5 to stop recording. The system replays your new
announcement.
To review your announcement — Press 7 1.
Record a Memo
1 Connect with the answering system.
2 Press
# and begin speaking after the beep.
3 Press 5 when you are finished.
Room Monitor with Intercom
You can call the answering system and listen to any activity in the room.
1 Connect with the answering system.
2 Press
9 8 to listen for 30 seconds.
3 If you wish, you can press 8 while the monitor is active to speak to someone in
the room (up to 30 seconds).
4 Press 8 again during intercom operation to return to listening only.
5 Press 5 or # at any time to exit Room Monitor with Intercom.
ANSWERING SYSTEM OPERATION
FROM A REMOTE TOUCH TONE PHONE
1760_book_1AT&T 5/1/00 7:38 PM Page 19