Rivers Edge RE629 15' 2-Man Ladder Stand - Manual (Page 18)

Check for parts online at www.huntriversedge.com or call 800-450-EDGE (3343) M-F 8-5 18
Operator's Manual
Rivers Edge Two-Man Ladder Stands
5. Attach the platform support tube (411031) to the foot platform and
seat platform using (2) provided 1/4-20 x 2-1/4” bolts, locknuts and
steel washers. SEE FIGuRE 3.
6. Attach the tree blade extension tubes (411030) to the bottom side
of the seat platform using (4) provided 1/4-20 x 2-1/4” bolts, lock-
nuts and steel washers. SEE FIGuRE 4.
7. Attach the tree blade weldment (SL67) to the top side of the tree
blade extension tubes using (2) provided 1/4-20 x 2-1/4” bolts,
locknuts and steel washers. SEE FIGuRE 4.
8. Insert the (2) shooting rail extension weldments (411028) into the
receiving ends of the backrest frame/upper tree blade (411025).
Secure all three pieces to the side loop frames using (6) provided
1/4-20 x 2-1/4” bolts, (6) locknuts and (8) steel washers. SEE FIGuRE 5.
note: use (1) steel washer on each side of this assembly to
correctly take up the gap between the side loop frame and the
shooting rail extension.
Figure 5
Figure 4
Figure 3
1/4-20 X 2-1/4" bolts
platform support tube
seat platform
foot platform
steel washers
locknuts
tree blade
weldment
tree blade extension tubes
1/4-20 X 2-1/4" bolts steel washers
locknuts
shooting rail extension
weldments
backrest frame/upper tree blade
1/4-20 X 2-1/4" bolts
steel washers
locknuts
steel
washers