Ransburg DR-1 Fluid Regulator 74151 - Manual (Page 4)

SAFETY PRECAUTIONS
Before operating, maintaining or servicing any Rans-
burg coating system, read and understand all of the
technical and safety literature for your Ransburg
products. This manual contains information that
is important for you to know and understand. This
information relates to USER SAFETY and PREVENTING
EQUIPMENT PROBLEMS. To help you recognize this
information, we use the following symbols. Please
pay particular attention to these sections.
A WARNING! states information to alert you to a situ-
ation that might cause serious injury if instructions
are not followed.
A CAUTION! states information that tells how to
prevent damage to equipment or how to avoid a
situation that might cause minor injury.
A NOTE is information relevant to the procedure in
progress.
While this manual lists standard specifications and
service procedures, some minor deviations may be
found between this literature and your equipment.
Differences in local codes and plant requirements,
material delivery requirements, etc., make such
variations inevitable. Compare this manual with
your system installation drawings and appropriate
Ransburg equipment manuals to reconcile such
differences.
Careful study and continued use of this manual will
provide a better understanding of the equipment and
process, resulting in more efficient operation, longer
trouble-free service and faster, easier troubleshooting.
If you do not have the manuals and safety literature
for your Ransburg system, contact your local Ransburg
representative or Ransburg.
SAFETY
W A R N I N G
> The hazards shown on the following
page may occur during the normal use of
this equipment. Please read the hazard chart
beginning on page 2.
!
W A R N I N G
> The user MUST read and be familiar with
the Safety Section in this manual and the
Ransburg safety literature therein identified.
> This manual MUST be read and thoroughly
understood by ALL personnel who operate, clean
or maintain this equipment! Special care should
be taken to ensure that the WARNINGS and safety
requirements for operating and servicing the
equipment are followed. The user should be
aware of and adhere to ALL local building and
fire codes and ordinances as well as NFPA-33
SAFETY STANDARD, prior to installing, operating,
and/or servicing this equipment.
!
DR-1 Fluid Regulator - Safety
1 LN-9223-00.10