Ransburg Serial Analog Module A11012 - Manual (Page 19)

LN-9258-07.2
MANUAL CHANGE SUMMARY
This manual was published to replace Service
Manual LN-9258-07.1 Serial Analog Module, to
make the following changes:
1. Revised Pressure Output to "0 to input pressure"
in the Pneumatic section of SPECIFICATIONS.
2. Revised Linearity to "10-90 psi" in the Electrical
Input section of SPECIFICATIONS.
3. Revised Pneumatic Connections table in
Connections section of INSTALLATION.
4. Added "REPLACEMENT UPGRADE OF
75118-01 ANALOG MODULE WITH A11012-00
SERIAL ANALOG MODULE" in OPERATION
section.
5. Revised "Figure 2: Block Diagram" in the
INSTALLATION section.