Kasco Marine 5.3E(H)J User Manual
Page 8
8
The Willow nozzle (marked W on the inside of the
cone) uses the 3/8” x 4” bolt.
Model
HP
Height
Width
8400, 2.3
2
3.4 m
10.4 m
3.1, 3.3
3
3.6 m
8.2 m
The Juniper nozzle (marked with J on in inside of the
nozzle cone) uses the 3/8” x 4” bolt.
Model
HP
Height
Width
8400, 2.3
2
1.8 m
13.4 m
3.1, 3.3
3
2.7 m
12.2 m
The Spruce nozzle uses the three self tapping screws
to attach over the pump housing and the Y Insert must
be removed.
Model
HP
Height
Width
8400, 2.3
2
5.5 m
3 m
3.1, 3.3
3
5.8 m
2.1 m
J Nozzle Options
NOTE: Pattern sizes listed are approximate. Varia-
tions in voltage caused by regional electrical differenc-
es or voltage drop due to long power cords may result
in reduced pattern sizes.
The Redwood nozzle uses the 3 self tapping screws to
attach over the pump housing and the Y Insert must be
installed.
Model
HP
Height
Width
8400, 2.3
2
5.5 m
1.5 m
3.1, 3.3
3
6.1 m
0.9 m
The Linden nozzle (marked L inside one of the fi ns)
uses the 3/8” x 4” bolt.
Model
HP
Height
Width
8400, 2.3
2
4.7 m
10.4 m
3.1, 3.3
3
4.1 m
9.8 m
5.3
5
4.9 m
8.5 m