Asus M2N-E SLI - Manual (Page 94)

4-36 Chapter 4: BIOS setup
4.5.4 Hardware Monitor
The items in this sub-menu displays the hardware monitor values
automatically detected by the BIOS. It also allows you to change CPU Q-Fan
feature-related parameters. Select an item then press to display
the configuration options.
F1:Help ↑↓ : Select Item -/+: Change Value F5: Setup Defaults
ESC: Exit →←: Select Menu Enter: Select Sub-menu F10: Save and Exit
Select Menu
Item Specific Help
Press [Enter] to
enable or disable
Hardware Monitor
CPU Q-Fan Control [ Disabled ]
x CPU Q-Fan Profile Performance
Chassis Q-Fan Control [Disabled]
x Chassis Q-Fan Profile Performance
Vcore Voltage [1.36V]
3.3V Voltage [3.31V]
5V Voltage [4.97V]
12V Voltage [11.90V]
CPU Temperature 45ºC
M/B Temperature 36ºC
CPU FAN Speed 3260 RPM
CHASSIS FAN Speed 0 RPM
Power FAN Speed 0 RPM
CPU Fan Speed warning [800 RPM]
Phoenix-Award BIOS CMOS Setup Utility
Power
CPU/Chassis Q-Fan Control [Disabled]
Allows you to enable or disable the CPU/Chassis Q-Fan controller.
Configuration options: [Disabled] [Enabled]
CPU/Chassis Q-Fan Profile [Performance]
Allows you to set the CPU/Chassis Q-Fan type.
Configuration options: [Performance] [Optimal] [Silent]
Only when the Q-Fan Control is set to [Enabled], Q-Fan Profile are
configurable.
VCORE Voltage[1.36V]
Allows you to enable or ignore the VCore voltage..
Configuration options: [1.36V] [Ignore]
3.3V Voltage[3.31V]
Allows you to set or ignore the 3.3V voltage.
Configuration options: [3.31V] [Ignore]
5V Voltage[4.97V]
Allows you to set or ignore the 5V voltage.
Configuration options: [4.97V] [Ignore]