Asus M2N-E SLI - Manual (Page 126)

5-20 Chapter 5: Software support
Entering the NVIDIA ® RAID utility
To enter the NVIDIA ® RAID utility:
1. Boot up your computer.
2. During POST, press to display the main menu of the utility.
The RAID BIOS setup screens shown in this section are for reference
only, and may not exactly match the items on your screen.
[F6] Back [F7] Finish [TAB] Navigate [↑↓] Select [ENTER] Popup
At the bottom of the screen are the navigation keys. These keys allow you
to move through and select menu options.
NVIDIA RAID Utility Oct 5 2004
- Define a New Array -
RAID Mode: Striping Striping Block: Optimal
Free Disks Array Disks
Loc Disk Model Name Loc Disk Model Name
1.0.M XXXXXXXXXXXXXXXXXX
1.1.M XXXXXXXXXXXXXXXXXX [→] Add
2.0.M XXXXXXXXXXXXXXXXXX
2.1.M XXXXXXXXXXXXXXXXXX
[←] Del
Creating a RAID Volume
To create a RAID volume:
1. From the NVIDIA ® RAID utility Define a New Array menu, select RAID
Mode then press . The following submenu appears.
Mirroring
Striping
Stripe Mirroring
Spanning
Use the up or down arrow keys
to select a RAID mode then press
.