4 pcipnp, Hyper transport frequency [auto, Amd live! [disabled – Asus M2N-E SLI User Manual
Page 84: Amd cool’n’quiet function [disabled, Plug & play o/s[no, Primary display adapter[pci
4-26
Chapter 4: BIOS setup
Trfc[Auto]
Configuration options: [Auto] [0] [1] [2] [3]
1T/2T Memory Timing[Auto]
Configuration Options: [Auto] [1T] [2T]
Hyper Transport Frequency [Auto]
Configuration options: [1x] [2x] [3x] [4x] [5x] [Auto]
AMD Live! [Disabled]
Enables or disables AMD Live! technology.
Configuration options: [Disabled] [Enabled]
AMD Cool’n’Quiet Function [Disabled]
Enables or disables the AMD Cool’n’Quiet function.
Configuration options: [Auto] [Disabled]
F1:Help ↑↓ : Select Item
-/+: Change Value F5: Setup Defaults
ESC: Exit →←: Select Menu
Enter: Select Sub-menu
F10: Save and Exit
PCIPnP
Plug & Play O/S
[
No
]
Primary Display Adapter
[PCI]
Phoenix-Award BIOS CMOS Setup Utility
Advanced
4.4.4 PCIPnP
Plug & Play O/S[No]
When set to [No], the BIOS configures all the devices in the system.
When set to [Yes] and if you install a Plug and Play operating system, the
operating system configures the Plug and Play devices not required for
boot.
Configuration options: [No] [Yes]
Primary Display Adapter[PCI]
Allows selection of graphics controller to use as the primary boot device.
Configuration options: [PCI] [PCI-E]
Select Menu
Item Specific Help
Enable or Disable LAN
cable check during POST.