General Pump KE Repair Manual - Manual (Page 8)

GENERAL PUMP
A member of the Interpump Group
KE SERIES
Page 8
Determine the shim pack as indicated in the table below.
fig. 10
Measurement Shim Type # Pieces
From: 0.05 to: 0.10 / /
From: 0.11 to: 0.20 0.1 1
From: 0.21 to: 0.30 0.1 2
From: 0.31 to: 0.35 0.25 1
From: 0.36 to: 0.45 0.35 1
From: 0.46 to: 0.55
0.35
0.10
1
1
From: 0.56 to: 0.60 0.25 2
From: 0.61 to: 0.70
0.35
0.25
1
1
E) Insert the shims under the cover on the sight glass side (see fig. 11), fixing it to the crankcase using the
appropriate screws, and verifying that the stall torque is between 3-4 ft. lbs. (4-6 Nm).
F) If the torque values is correct, connect the rods to the crankshaft; other wise, redefining the shims again
repeating the operations from point “C”.
Ref 300892 Rev.A
06-12