Introduction, Description, Power – Fairbanks DPB Series Scale Store User Manual
Page 6: Before operation

06/10
6
50701 Rev. 2
Section 1: General Information
INTRODUCTION
The CHC Series Electronic Bench Scale is designed to be a simple-to-operate,
general purpose scale. An audible signal is given each time a key is pressed to
insure error-free operation. Models are available in 12, 25, and 60 pound
capacities. Each model has a bright, easy-to-read LED display. All weights are
convertible between pounds and kilograms.
The scale is intended for use in non-commercial applications and is not legal-for-trade.
NOTE: It is the owner's responsibility to document, notify, and follow-up regarding
shipping damage with the carrier.
DESCRIPTION
The scale is shipped fully assembled and wired.
The scale series capacities are 12 pounds, 25 pounds, or 60 pounds.
Available capacities and graduation sizes are:
Scale model
Capacity
Graduation
Resolution
DPB12
12 lbs.
0.001 lb.
1/12000
DPB25
25 lbs.
0.002 lb.
1/12500
DPB65
60 lbs.
0.005 lb.
1/12000
POWER
The power button is located on the bottom casing.
When the unit requires charging, please use the correct power supply.
BEFORE OPERATION
Place the scale on a flat, stable surface.
Adjust the four feet of the scale to level it so the bubble in the level is in the center.
Do not place the scale in direct sunlight or next to an HVAC vent.
Keep the scale clean, but do not get it wet. If it accidentally gets wet, wipe it dry
with a clean, soft cloth.
Keep the scale away from high temperatures and damp conditions.