Fairbanks LabelBank Barcode Application For the FB3000 Series Operators Manuals - Manual (Page 16)

06/08 16 51170 Rev. 1
Section 2: Programming Introduction
NAVIGATION TIPS
The three main ways to navigate through the LabelBank Program are listed below.
Touchscreen
Using the Touchscreen is the most user-friendly way of navigating through the
different menu options. Of course, the FB3000 must be equipped with the
Touchscreen, and the software must be activated for this feature to work. If the
Touchscreen feature is part of the factory installation, it will start when the Unit boots
up. It should be noted that nothing in this application requires using the mouse if a
Touchscreen is present.
The Mouse and Keypad
If the FB3000 is not equipped with a Touchscreen, or if this feature is disabled, then
navigating though the different menu options is done using the mouse and keypad.
Listed below are some basic navigating tips when using a mouse.
Using Only the Keypad
Although this is the most difficult way to navigate through the different fields, it is still
possible to enter numeric values and configure dialogs using only the keypad.
Useful key functions include the following:
• The Tab key advances to the next field.
• The Shift + Tab reverses to the previous field.
• The UP/Down Arrow keys move between fields.
• The Left/Right Arrows navigate within the field.
• Highlight the clock feature setting, then the Arrow key
moves time forward or backwards; the F1 key moves
the AM/PM choice.
• The Enter key selects a choice.