Fairbanks LabelBank Barcode Application For the FB3000 Series Operators Manuals - Manual (Page 11)

Section 1: General Information
06/08 11 51170 Rev. 1
Electronic Component Care
• Much of the equipment consists of printed circuit
assemblies, which must be installed using
ESD
handling procedures .
• Replacement of individual components is not allowed.
• All components must be returned intact for
replacement credit per normal procedures.
• All electronic and mechanical adjustments are
considered to be part of the installation, and are
included in the installation charge(s).
• Included is any required computer programming or
upgrades.
• Included are any accuracy and/or
• The AC receptacle / outlet shall be located near the Indicator and easily
accessible.
Electrical connections other than those specified may not
be performed.