Fairbanks 3500 Series Yellow Jacket - Manual (Page 10)

Section 2: Company Service Information
11/10 10 51233 Rev. 4
Equipment Checkout
Position the equipment with these points in mind:
 Intense direct sunlight can harm the display.
 Do not locate near magnetic material or equipment/Instruments which use
magnets in their design.
 Avoid areas which have extreme variations in room temperatures. Temperatures
outside the Instrument’s specifications will affect the weighing accuracy of this
product.
 Do not load the platform if there is any evidence of damage to the platform or
supporting structure.
Users’ Responsibility
 All electronic and mechanical calibrations and/or adjustments required for making
this equipment perform to accuracy and operational specifications are considered
to be part of the installation.
─ They are included in the installation charge.
─ Only those charges which are incurred as a result of the equipment's inability to
be adjusted or calibrated to performance specifications may be charged to
warranty.
 Absolutely no physical, electrical or program modifications other than selection of
standard options and accessories are to be made to this equipment.
 The equipment consists of printed
circuit assemblies which must be
handled using ESD handling
procedures, and must be replaced as
units.
─ Replacement of individual
components is not allowed.
─ The assemblies must be properly
packaged in ESD protective material
and returned intact for replacement
credit per normal procedures.