Fairbanks SCB-R9000-14U Ultegra Bench Scale - Manual (Page 6)

Section 2: Setup
09/13 6 51222 Rev. 3
2.3. COMPUTER CONNECTIONS:
1. USB setup: The USB port will only function with a computer utilizing Windows
2000, Windows XP, or higher operating system. When the scale-connected USB
cable is interfaced to a computer’s USB port or USB hub, the computer will prompt
a device has been found and it will automatically install the driver.
2.4. GRAVITY USE COMPENSATION SETTING
The SCB-R9000-14U has a gravity use compensation setting which must be set based upon
the geographical zone in which the scale is being installed.
Access this setting by pressing the Program button. The button is located looking at the
front of the scale inside the right rear portion of the scale. An access cover must be
removed.
1. The display will show GrU x. This is the Gravity Use Zone. Select the proper
zone number for your location. Use the [ UNITS ] key to toggle to the selection. The
choices are:
-8, -7, -6, -5, -4, -3, -2, -1, 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10
Zone Latitude (degrees) Reference City
-8 68.659 Point Hope, AK
-7 64.929 Fairbanks, AK
-6 61.567 Anchorage, AK
-5 58.444 Fort Vermilion, Alberta
-4 55.485 High Prairie, Alberta
-3 52.638 Coventry, England
-2 49.865 Winnipeg, Manitoba
-1 47.137 Tacoma, WA
0 44.427 St. Johnsbury, VT
1 41.711 Des Moines, IA
2 38.963 Kansas City, MO