beautypg.com

Safety – Alamo Versa Series User Manual

Page 13

background image

SAFETY

VERSA 03/09

Safety Section 1-7

© 2009 Alamo Group Inc.

SAFETY

The Mower shaft speed must not - UNDER ANY CIRCUMSTANCES - exceed 1800 RPM.

(SBM-15)

Use extreme care and Safety Awareness when using the boom mower head to mulch loose

brush or wood that has fallen on the ground from overhead trimming. DO NOT mulch this

debris if bystanders, vehicles, livestock or buildings are within 300 feet of the mower. This cut debris can be

thrown at great velocities and could result in serious injury or even death.

(SBM-17)

Do not back up this implement when the boom or mower head is extended. Backing could

damage the machine or its components.

(SBM-19)

Follow these guidelines to reduce the risk of equipment and

grass fires while operating, servicing, and repairing the Mower

and Tractor:

-Equip the Tractor with a fire extinguisher in an accessible

location.

-Do Not operate the Mower on a Tractor with an underframe

exhaust.

-Do Not smoke or have an open flame near the Mower and

Tractor.

-Do Not drive into burning debris or freshly burnt areas.

-Do Not attempt to mow or place the mower head close to

burning debris.

-Never allow clippings or debris to collect near drivelines,

gearboxes or hydrualic componts such as valves, tanks,

pumps and motors. Periodically shut down the Tractor and

Mower and clean clippings and collected debris from the

mower deck.

(SBM-20)

Do not operate Mower if excessive vibration exists. Shut down PTO and the Tractor

engine. Inspect the Mower to determine the source of the vibration. If Mower blades are

missing or damaged replace them immediately. Do not operate the mower until the

blades have been replaced and the Mower operates smoothly. Operating the Mower with

excessive vibration can result in component failure and broken objects to be thrown

outward at very high velocities. To reduce the possibility of property damage, serious injury,

or even death, never allow the Mower to be operated with blades missing.

(SFL-4)