FEC AFC1200 - Manual (Page 54)

)(& ,QF
7.7.3 INDICATION SELECT
3-1. MOve the cursor on the menu bar to [INDICATION SELECT] using the
[←] [→]
keys and depress the
[↵]
key. THe pulldown window for INDICATION SELEct will
open.
3-2. USe the
[↑] [↓]
keys to move the cursor to the desired position for selecting the
following:
[SEQUENCE No.] 1-8
[SPINDLE No.] 1-24
[STORED DATA No. [ ] 001-500
[ALL DATA] [ALL DATA], [ACCEPT, REJECT DATA],
[ACCEPT DATA], or [REJECT DATA]
FIG. 7-7-3-1 stored dATA indication select
3-3. Use the
[← ← ← ←] [→ → → →]
keys to change sequence number, spindle number and data
format selection.
3-4.
Use the numerical keys to enter the desired stored data number.
3-5. Depress the
[↵ ↵↵ ↵]
key after making selections and the screen will automatically change
to display the selected data.
7.7.4 Store Data Statistics Enable
3-6. Use the
[←] [→]
keys to select [STATISTICS] from the menu bar. Select [START]
to calculate the two right columns of the stored data screen. Select [CANCEL] to
return to the normal stored data display mode.
FIG. 7-7-4 stored dATA statistics enable
Notes:
Chapter 7: System Operation
Page 7-54