FEC AFC1200 - Manual (Page 25)

)(& ,QF
REVERSE TORQUE LOW LOw torque limit for REVERSE ANGLE COntrol
7.1.12 Vocabulary List 6 [Current]
FIG 7.1.12 Set Parameter [CURRENT]
HIGH CURRENT High Limit for Current drawn by tool motor when performing
the final torque. (Measured at Peak Torque).
LOW CURRENT
Low Limit for Current drawn by tool motor when performing
the final torque. (Measured at Peak Torque).
HIGH WARNING
High Warning Limit to trigger the High Current Warning
output signal. (Measured at Peak Torque).
LOW WARNING Low Warning Limit to trigger the Low Current Warning output
signal. (Measured at Peak Torque).
Chapter 7: System Operation
Page 7-25