FEC AFC1200 - Manual (Page 53)

)(& ,QF
7.7 STORED DATA
The function of this screen is to show the previous fastening data and some abbreviated
Statistics calculation like 6 sigma and Cpk. This data is stored in RAM memory and is lost
once the System is powered off. A function is provided to save this information either in the
Hard or the Floppy Disk.
7.7.1 TABLE oF CONTENTS
7.7.1. TAble of COntents for STORED DAta screens
7.7.2. SCREEN EXPLANATION
7.7.3. INDICATION SELECT
7.7.4. Stored Data Statistics
7.7.5
Record
7.7.6 SCREEN SCROLLING aND PRINT FUNCTIONs
7.7.2 SCREEN EXPLANATION
2-1. THE STORED Data screen displays the previous data for a pre-selected spindle
number and sequence number. FOUr (4) data formats are selectable:
[ALL DATA]: ACcept, reject, bypass, aBNormal data and statistics will b
be displayed.
[ACCEPT, REJECT DATA]:
ACcept, reject and statistics will be displayed.
[ACCEPT DATA]: ACcept data and statistics will be displayed.
[REJECT DATA]: REJect data and statistics will be displayed.
2-2.
AFTER selecting the SEQUENCE NO., SPINDLE NO., STORED DATA NO. and
DATA FORMAT from the INDICATION SELEct pulldown menu, the screen will
display the requested information. The standard screen format includes: basic
information in the header, the pre-selected items from the "FASTENING DATA"
screen in the left hand column, five columns of fastening data and the two statistics
columns.
FIG. 7-7-2 stored dATA screen
Chapter 7: System Operation
Page 7-53