Elite Screens ezFrame Plus Series - Manual (Page 5)

5
Rev.091912-JA
www.elitescreens.com [email protected]
Black backing for AcousticPro models
This procedure only applies to AcousticPro models. Disregard this section if your ezFrame does not
include either the AcousticPro1080 or AcousticPro4K screen material. The purpose of the black
backing material is to block out any light penetration that may reflect off of anything mounted behind
the screen, which can cause distortion to the projected image.
（fig.6）
Interval markings reveal the best points for inserting the fix plates (Fig. 1). The prongs on the fix plates insert to the lip on
the back of the frame creating a friction hold that will firmly keep the material and black backing in place (Fig. 2-3). After
the material has been installed, the backing will lie over the back of the white (AcousticPro) material and then be held in
place by the Velcro on the fix plates.
The black backing is held in place by the Velcro that is on the fix plates.
Fig. 1
Fig. 3
Fig. 2
Black backing