Elite Screens Evanesce B Series - Manual (Page 8)

Rev.102212-JA 8 www.elitescreens.com
D
H
G
3. The M8 expanding bolts (G) mount into thick wood beams, stone or concrete and will support the
screen. Use the Socket wrench (D) to attach the M8x40mm hexagonal screws. The expanding bolts
should be firmly tightened and tested to make sure that they will hold the weight of the screen.
4. Insert the threaded rods (C) through the M8 expanding bolts and then attach the M8x40mm
hexagonal screws with the washer (E). Last put the Hanging Bracket (B) through the threaded rod equal
to the height of the screen’s housing. Once they are firmly in place (as shown below) make sure that
they will hold the weight of the screen.
5.
Push the screen up into the space. Use the threaded rods (C) to attach the screen assembly to the
ceiling. The hexagonal screws (E) will connect the screen to the rest of the assembly. Once firmly in
place, use the nuts (F) to ensure a firm connection. Use the socket wrench (D) to make sure that the
bolts are firmly tightened.
Ceiling Socket wrench (H)
Ceiling
E and F
C
B
C
Push
Push the screen
to the hole of the
ceiling，the
screw across the
hole of the end
cap.
Use the Socket wrench
to attach the washer
and the outside hex
screws, and then
adjust the bottom of
the screen to make it
parallel with the
ceiling, and then
fasten the screw.