Elite Screens Evanesce B Series - Manual (Page 4)

Rev.102212-JA 4 www.elitescreens.com
UP
Stop
Down
Hardware Parts List for Evanesce B Series
Please make sure all parts listed below are included before proceeding with the installation.
Hardware Parts List for above ceiling installation
A.
Suspension Bracket x 2
B.
Suspension
Bar x 4
C. End Flange x 2
C. M8x16mmx1.5mm
washer x 8
D. M6x13mmx2mm
washer x 8
E. M8 nut x 4
F. M6 nut x 4 G. M8x40mm hex screw x 4 H.M6x20mm screw x 4
Installation Instructions
The Evanesce B allows access for above or below ceiling installation. Please follow the instructions
described in the following steps below for your type of installation.
Power
The Evanesce B Series includes a 3-Prong Power Cord for use in a non-concealed power outlet. If your
installation will be entirely concealed (including power outlet), Elite Screens strongly recommends a
hardwire connection. Please refer to the image below for both 110v & 220v wiring information.
4. IR Remote Control: The Infrared
functions by direct line of sight
contact with a beam range of 30 feet. 5. RF Remote Control: The radio
waves eliminate the need for a direct
line of sight with a range of 100 feet.