Elite Screens Spectrum2 Series - Manual (Page 6)

Rev.042613-JA
www.elitescreens.com [email protected] 6
Built-in 3 Way Control Switch
1. The Spectrum2 Series comes with a 3 Way Control Switch attached to the Power Cord, which is 3.5
meters in length.
2. Use the provided Bubble Level (f) to ensure the screen is level before plugging in the power cord
3 Way Control
Up/Stop/Down
Switch
Remove Screen from Mounting Brackets
1. Pull down on the Mounting Bracket Release Tab and remove the bottom of the case first, away
from the wall/ceiling, followed by the top of the case.
Release Tab Pull Bottom of case first away from wall/ceiling.