Teledyne Insta Trans - trace and percent oxygen transmitter - Manual (Page 9)

Trace Oxygen Transmitter Introduction
Teledyne Analytical Instruments 1
Introduction
1.1 Overview
The Teledyne Analytical Instruments Insta-Trans Trace Oxygen
Transmitter is a versatile instrument for detecting oxygen at the parts-per-
million (ppm) level in a variety of gases. This manual covers the Insta-Trans
Trace Oxygen Transmitter. These units are NEMA-4 rated and may be used
in hazardous environments. The Insta-Trans is also Factory Mutual approved
when installed in accordance with drawing D-73226 located in the back of
this manual.
1.2 Typical Applications
A few typical applications of the Insta-Trans are:
 Monitoring inert gas blanketing
 Air separation and liquefaction
 Chemical reaction monitoring
 Semiconductor manufacturing
 Petrochemical process control
 Quality assurance
 Gas analysis certification.
1.3 Main Features of the Transmitter
The Insta-Trans Trace Oxygen Transmitter is sophisticated yet
simple to use. The main features of the analyzer include:
 3½ digit LCD display with range and calibration
annunciators.
 Six ranges: 0-10 ppm through 0-25%.
 Stainless steel cell block.