Model 9700 – Teledyne 9700 - Flue gas analysis system User Manual

Page 2

i i

Model 9700

TELEDYNE BROWN ENGINEERING

Analytical Instruments

transcribed, stored in a retrieval system, or translated into any other language or com-
puter language in whole or in part, in any form or by any means, whether it be
electronic, mechanical, magnetic, optical, manual, or otherwise, without the prior
written consent of Teledyne Analytical Instruments, 16830 Chestnut Street, City of
Industry, CA 917491580.

Warranty

This equipment is sold subject to the mutual agreement that it is warranted by

us free from defects of material and of construction, and that our liability shall be
limited to replacing or repairing at our factory (without charge, except for
transportation), or at customer plant at our option, any material or construction in which
defects become apparent within one year from the date of sale, except in cases where
quotations or acknowledgements provide for a shorter period. Components manufactured
by others bear the warranty of their manufacturer. This warranty does not cover defects
caused by wear, accident, misuse, or neglect. We assume no liability for direct or
indirect damages of any kind and the purchaser by the acceptance of the equipment will
assume all liability for any damage which may result from its use or misuse.

We reserve the right to employ any suitable material in the manufacture of our

apparatus, and to make any alterations in the dimensions, shape or weight of any parts,
in so far as such alterations do not adversely affect our warranty.

Important Notice

This instrument is intended to be used as a tool to gather valuable data. The

information provided by the instrument may assist the user in eliminating potential
hazards caused by the process that the instrument is intended to monitor; however, it is
essential that all personnel involved in the use of the instrument or its interface with
the process being measured be properly trained in the process itself, as well as all
instrumentation related to it.

The safety of personnel is ultimately the responsibility of those who control

process conditions. While this instrument may be able to provide early warning of
imminent danger, it has no control over process conditions, and can be misused. In
particular, any alarm or control system installed must be tested and understood, both as
to how they operate and as to how they can be defeated. Any safeguards required such as
locks, labels, or redundancy must be provided by the user or specifically requested of
Teledyne when the order is placed.

The purchaser must be aware of the hazardous conditions inherent in the

process(es) he uses. He is responsible for training his personnel, for providing hazard
warning methods and instrumentation per the appropriate standards, and for ensuring
that hazard warning devices and instrumentation are maintained and operated properly.

TBE/AI, the manufacturer of this instrument, cannot accept responsibility for

conditions beyond its knowledge and control. No statement expressed or implied by
this document or any information disseminated by the manufacturer or his agents is
to be construed as a warranty of adequate safety control under the user’s process
conditions.