Teledyne 329R - Oxygen analyzer User Manual

Page 2

TELEDYNE ANALYTICAL INSTRUMENTS

No part of this manual may be reproduced, transmitted, transcribed, stored in a retrieval system,

or translated into any other language or computer language in whole or in part, in any form or by any
means, whether it be electronic, mechanical, magnetic, optical, manual, or otherwise, without the
prior written consent of Teledyne Analytical Instruments, 16830 Chestnut Street, City of Industry, CA
91749-1580.

Warranty

This equipment is sold subject to the mutual agreement that it is warranted by us free from

defects of material and of construction, and that our liability shall be limited to replacing or repairing
at our factory (without charge, except for transportation), or at customer plant at our option, any
material or construction in which defects become apparent within one year from the date of shipment,
except in cases where quotations or acknowledgements provide for a shorter period. The Micro-Fuel
Cell warranty period begins on the date of shipment from Teledyne. Components manufactured by
others bear the warranty of their manufacturer. This warranty does not cover defects caused by wear,
accident, misuse, neglect or repairs other than those performed by Teledyne or an authorized service
center. We assume no liability for direct or indirect damages of any kind and the purchaser by the
acceptance of the equipment will assume all liability for any damage which may result from its use or
misuse.

We reserve the right to employ any suitable material in the manufacture of our apparatus, and to

make any alterations in the dimensions, shape or weight of any parts, in so far as such alterations do
not adversely affect our warranty.

IMPORTANT NOTICE

This instrument is intended to be used as a tool to gather valuable data. The information

provided by the instrument may assist the user in eliminating potential hazards caused by the user’s
process; however, it is essential that all personnel involved in the use of the instrument or its inter-
face, with the process being measured, be properly trained in the process itself, as well as all instru-
mentation related to it.

The safety of personnel is ultimately the responsibility of those who control process conditions.

While this instrument may be able to provide early warning of imminent danger, it has no control
over process conditions, and it can be misused. In particular, any alarm or control systems installed
must be tested and understood, both as to how they operate and as to how they can be defeated. Any
safeguards required such as locks, labels, or redundancy, must be provided by the user or specifically
requested of Teledyne when the order is placed.

The purchaser must be aware of the hazardous process conditions inherent in the process(es) he

uses. He is responsible for the training of personnel, for providing hazard warning methods and
instrumentation per the appropriate standards, and for ensuring that hazard warning devices and
instrumentation are maintained and operated properly.

TAI, the manufacturer of this instrument, cannot accept responsibility for conditions beyond its

knowledge and control. No statement expressed or implied by this document or any information
disseminated by the manufacturer or its agents, is to be construed as a warranty of adequate
safety control under the user’s process conditions.