American Dryer Corp. ML-96D - Manual (Page 32)

28
NOTE: The dryer can be stopped at any time by opening main door or by pressing the "STOP" key.
To restart the dryer, press the "START" key or preprogrammed cycle key (i.e., key "E").
NOTE: Selection (setting) changes can be made at any time during the drying cycle by pressing the
"STOP/CLEAR" key twice. The light emitting diode (L.E.D.) display will return to "READY"
at which time a new cycle selection can be made.
K. SHUT DOWN INSTRUCTIONS
If the dryer is to be shut down (taken out of service) for a period of time, the following must be performed:
1. Discontinue electrical power to the dryer either at the external disconnect switch or the circuit breaker.
2. Discontinue the gas supply:
a. SHUT OFF external gas supply shutoff valve.
b. SHUT OFF internal gas supply shutoff valve located in the gas valve train area.