Server CC 1/3 (86140) - Manual (Page 3)

RePLACING OR CLeANING
FILTeR
FOR BEST UNIT COOLING AND PERFORMANCE,
CHANGE OR CLEAN FILTER AT A MINIMUM OF ONCE
PER MONTH.
1 SEE UNIT TAKE DOWN.
2 ENSURE UNIT IS “OFF” AND UNPLUGGED.
3 TURN UNIT OVER TO ACCESS FILTER HOLDER
AND FILTER ON UNDERSIDE OF UNIT.
4 LIFT OFF FILTER HOLDER BY PULLING IT OFF
FROM ONE EDGE.
5 REMOVE FILTER AND CLEAN OR REPLACE.
• Server Products Inc. Pack of 5 Replacement filters:
86067
• Filter can be cleaned with hot water and
dishwashing detergent. Fully rinse.
6 IF NECESSARY, WIPE DOWN FAN COVER AND
SURROUNDING AREA ON UNDERSIDE OF UNIT
WITH CLOTH DAMPENED WITH DISHWASHING
LIQUID OR MILD SANITIZING DETERGENT.
C
E
Warning- electrical shock could occur:
• Be sure to wring out any excess water from
cloth before wiping near fan of unit.
• Dripping water into unit can cause electrical
damage to unit.
7 PLACE NEW OR CLEANED FILTER OVER FAN COVER.
8 REPLACE FILTER HOLDER.
UNIT TAKe-DOWN
1 PRESS SWITCH TO “OFF” POSITION.
2 UNPLUG CORD.
3 REMOVE FOOD PRODUCT VESSEL, JAR, OR
POUCH/BOX FROM UNIT BASIN.