Server EZT (85899) pump v.2 User Manual
Warranty and service pump parts
Server Products Inc.
3601 Pleasant Hill Road
Richfield, WI 53076
USA
(262) 628-5600
Toll Free (800) 558-8722
(262) 628-5110
www.server-products.com
Contact your dealer or Server Products Inc customer service department.
ORDERING REPLACEMENT PARTS
Be prepared to provide the following information:
Model Name
Part Number
Series Number
Manufactuing Date Code
Typically, this information can all be found on the pump lid or base unit of the coordinating appliance.
SERVICE, REPAIR, RETURNS
Before returning any item to Server Products, you must call customer service to obtain a Return Authorization
Number. Then ship the unit, to the factory, with this number.
Server Products maintains a fully staffed service department with highly skilled factory trained personnel. Service
is extremely prompt and labor charges are reasonable.
SERVICE
SERVER PROCUCTS LIMITED WARRANTY
All Server Products equipment is backed by a two-year limited warranty against defects in materials and workmanship.
SCOPE OF WARRANTY.
Server Products Inc. (“Server Products”) warrants that, for a period of two (2) years from the date of purchase (the “Warranty
Period”), the equipment manufactured by it will be free from defects in workmanship and materials provided the equipment is used in the manner and in the
environment for which they were manufactured.
DISCLAIMERS AND LIMITATIONS. OTHER THAN AS SET FORTH ABOVE, SERVER PRODUCTS SPECIFICALLY DISCLAIMS ALL EXPRESS
AND IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO, WARRANTIES OF MERCHANTABILITY AND/OR FITNESS FOR A PARTICU-
LAR PURPOSE OR USE
.
This warranty does not extend to repairs or alterations undertaken without the prior written consent of Server Products or for goods
that are misused, abused or neglected or if the goods are not properly stored, maintained, installed or operated.
SERVER PRODUCTS SHALL NOT BE LIABLE FOR INCIDENTAL, SPECIAL, INDIRECT, EXEMPLARY, PUNITIVE OR CONSEQUENTIAL DAM-
AGES RESULTING FROM THE USE OF THE GOODS OR ARISING OUT OF ANY BREACH OF THIS WARRANTY; INCLUDING BUT NOT LIMITED
TO DAMAGE TO PROPERTY OR LOSS OF PROFITS OR REVENUE.
CLAIMS ADMINISTRATION.
All warranty claims must be made by calling our customer service department for a return authorization during the Warranty
Period and any alleged defective unit must be returned to Server Products factory, freight prepaid.
Upon receipt of any defective unit, Server Products, at its option, may either:
(i) replace any equipment proved to be defective, (ii) remedy or repair such defect or (iii) refund the purchase price of the defective equipment in the form
of a credit applicable to future purchases. Server Products obligation and Buyer’s sole remedy will be limited to these options. In the case of units or parts
purchased by Server Products from a third-party supplier:
Server Products’ obligation and Buyer’s sole remedy against Server Products or Server Products’s suppliers shall not exceed the settlement which Server Products
is able to obtain from its supplier.
GAUGING COLLAR OPTIONS
Portion Control
Each collar added reduces portion served by .25 oz
Each collar added reduces portion served by .125 oz
KNOB
LOCKING COLLAR EXAMPLES
HEAD TUBE
HEAD INSERT
SPRING
WASHER
PISTON
SEAL ASSEMBLY
SEAL
SEAL O-RING
LID EXAMPLES
CYLINDER O-RING (1
5/16
” D)
VALVE BODY
BRUSH OPTIONS
BRUSH 82526 (21”)
BRUSH 82049 (1
1/4
” D)
FOOD EQUIPMENT
LUBRICANT 40179
01587-Re
vD
-122911
CYLINDER
Connecting Pump To Pouch With Fitment
• Press pump connector down to pierce
through film in pouch fitment circle. Pump
connector will “snap” securely onto fitment.
• Install pump and product pouch combination into
shroud or jountain jar.
DISCHARGE TUBE EXAMPLES
DISCHARGE
TUBE NUT
DISCHARGE TUBE O-RING (1”D)
WARRANTY and SERVICE
PUMP PARTS