Asus P5A - Manual (Page 13)

ASUS P5A User’s Manual 13
III. INSTALLATION
Contents
III. INST
ALLA
TION
Jumpers
1) CLRTC
p. 14 Real Time Clock (RTC) RAM
2) KBPWR p. 15 Keyboard Power Up
3) VIO1 p. 15 +3V Voltage Selection
4) SGNT,SREQ,SOLOID p. 15 Audio Selection
5) FS0, FS1, FS2, FS3
p. 16 CPU External (BUS) Frequency Selection
6) BF0, BF1, BF2 p. 16 CPU to BUS Frequency Ratio
7) VID0, VID1, VID2, VID3 p. 18 Voltage Regulator Output Selection
Expansion Slots
1) DIMM Sockets
p. 19 168-Pin DIMM Memory Expansion Sockets
2) CPU ZIF Socket 7 p. 21 Central Processing Unit (CPU) Socket
3) SLOT 1, 2 p. 23 16-bit ISA Bus Expansion Slots *
4) PCI 1, 2, 3,4,5 p. 23 32-bit PCI Bus Expansion Slots**
Connectors
1) PS2KBMS
p. 25 PS/2 Keyboard Connector (6-pin Female)
2) PS2KBMS p. 25 PS/2 Mouse Connector (6-pin Female)
3) PARALLEL p. 26 Parallel (Printer) Port Connector (26-1 pins)
4) COM1, COM2 p. 26 Serial Port COM1 & COM2 (10-1 pins)
5) FLOPPY p. 26 Floppy Drive Connector (34-1 pins)
6) GAME_AUDIO p. 27 Audio Port Connectors (Three 1/8” Female)
7) GAME_AUDIO p. 27 Joystick/MidiConnector (15-pin Female)
8) USB p. 27 Universal Serial BUS Ports 1 & 2 (Two 4-pin Female)
9) PRIMARY/SECOND. IDE p. 28 Primary/Secondary IDE Connector (40-1 pins)
10) IDELED
p. 28 IDE LED Activity Light (2 pins)
11) ATX p. 29 ATX Motherboard Power Connector (20 pins)
12) CHASIS p. 29 Chassis Intrusion Alarm Lead (4-1 pins)
13) FAN p. 30 Power Supply, Chassis, CPU Fan Power Leads (Three 3 pins)
14) IR p. 30 IrDA-compliant Infrared Module Connector (5 pins)
15) MSG.LED (PANEL) p. 31 System Message LED (2 pins)
16) PWR SW. (PANEL) p. 31 ATX Power Switch/Soft Power Switch Lead (2 pins)
17) RESET (PANEL) p. 31 Reset Switch Lead (2 pins)
18) PWR.LED (PANEL) p. 31 System Power LED Lead (3 pins)
19) KEYLOCK (PANEL) p. 31 Keyboard Lock Switch Lead (2 pins)
20) SPEAKER (PANEL) p. 31 Speaker Output Connector (4 pins)
21) WOLCON p. 32 Wake-on-LAN Activity Connector (3 pins)
22) MODEM p. 32 MODEM Card Voice In Connector (4 pins)
23) AUX p. 33 Stereo Audio In Connector (4 pins)
24) CD1 p. 34 Stereo Audio In Connector (4 pins)
25) SMB p. 34 SMBus Connector (5-1 pins)
26) TRPWR p. 34 Power Supply Temperature External Connector (2 pins)
* The onboard hardware monitor uses the address 290H-297H so legacy ISA cards
must not use this address or else conflicts will occur.
**If the onboard audio (optional) is selected, PCI Slot 5 can only be used for a PCI
slave device.