ATON DLA6 - Manual (Page 30)

28 ©2008 • All rights reserved.
DLA2/4/6 Speaker Level Audio Router
RF Control
Symptom Possible Cause Solution
No control of DLA2/4/6
from optional RF Remote 1. Wiring: Signals from
RF Receiver Base not
reaching DLA2/4/6 Check RF Receiver Base
connection to DLA2/4/6
and verify connectivity
Check Room 1 indicator
on front of DLA2/4/6
by sending a command
from the RF remote. If
the indicator LED Á ashes
red, the RF signal is be-
ing received.
2. Remote Control bat-
teries are dead Replace batteries
Intermittent control of
DLA2/4/6 from optional
RF Remote 1. Position of Receiver
base not optimal Move Receiver base to
À nd optimum placement.
2. Radio Frequency de-
vices operating nearby in
same frequency band Check for other devices
in the home or neigh-
boring dwellings and
relocate if possible