Press & hold, Scene presets – ATON DLA6 User Manual

Page 27

DLA2/4/6 Speaker Level Audio Router

Scene Presets

Setting a Scene

A Scene Preset allows the volume level for each room to be saved and then recalled at any
time with the press of a button.

To set a Scene Preset:

Set the volume in each room to the desired level.

Note: Any room whose LED is not lit (red or blue) will be considered OFF when setting
a Scene.

Press and hold the

ALL ON/OFF Button for three seconds.

Press

& Hold

ROOM 1

ROOM 2

Once the Scene Preset has been saved, the Room LEDs for the rooms included in

the Scene Preset will blink on and off four times and the system will return to the

levels prior to setting the Scene Preset.

Note: If a Room LED does NOT blink, it will not be activated when a Scene is selected.

Recalling a Scene Preset

The Scene Preset values for each room can be recalled in two ways:

Press the

Scene Button on the IR Remote (or optional RF Remote).

Press the

Vol + and Vol - simultaneously for one second on the front

the

unit.

Press

& Hold

ROOM 1

ROOM 2

Note: Scene Presets override Default Volume Levels.

Note: Room LEDs are BLUE for any Room with Volume greater than 0 and OFF for any
Room with Volume of 0.

This manual is related to the following products: