ADIC Scalar Series - Manual (Page 65)

Diagnostics Menu 55
p Press ESC to return to the FIRMWARE REVISION main screen.
p Press the DOWN arrow key to bring up the Picker CPU selection.
p Press ENTER to select the Picker CPU.
p Press ESC to return to the FIRMWARE REVISION main screen.
p Press the DOWN arrow key to bring up the Servo Controller CPU selection.
p Press ENTER to select the Servo Controller.
p Press ESC twice to return to the Diagnostics Menu main screen.
Position Picker at Slot
The Position Picker at Slot function is used to position the Media Picker at a particular cartridge storage slot in
preparation to either pick a cartridge from the slot, or place a cartridge into the slot.
p Use LEFT r RIGHT to select the desired field. Select the row or slot using UP or DOWN Press ENTER to
activate.