Threading the label roll at the dispensing edge – Avery ALS 256 User Manual
Page 39

35
C
ONTENTS
3.2 I
NSERTING
LABEL
MATERIAL
ALS
20x
256
GB
Threading the label roll at the dispensing
edge
£
Unroll around 1 m of label strip and remove the
labels from it.
£
Pass the backing paper around the first deflection
roller [36A] and through the slot in the sensor [36B].
£
Feed the backing paper under the pressure roller
[36C] to the dispensing plate [36D].
£
Feed the backing paper around the dispensing plate
to the second deflection roller [36E].
[36] Path of the label strip at the dispensing edge.
A 1st deflection roller
B Label sensor
C Pressure roller
D Dispensing plate
E 2nd deflection roller
C
A
B
D
E